Portable Home Use  Oxygen Concentrator Generator With Atomizing Function

Description

Atomizing 9L Large Flow Portable Home Use  Oxygen Concentrator Generator With Atomizing Function XY-1SM

Specifications

• Can continuously work 24 hours
• Can definite time, using time is up to you
• Fully filtrate harmful substances in the air and refresh the air with rich oxygen
• Environmentally and health friendly
• Low noise, mute motor, physical oxygen generation
• Convenient earphone breathing apparatus
• Safely broad-spectrum, oxygen concentration satisfying varied demands
• Portable handle and light
• High stability and consistency, long lifetime
• Completely physical rich oxygen supply. much safer, more environmental and health friendly

Note : This is a supplementary medical equipment and is not intended for serious disease or those who stay alive solely on medical oxygen.

Atomizing 9L large Flow home use portable oxygen concentrator generator with atomizing function XY-1SM

Note : This is a supplementary medical equipment and is not intended for serious disease or those who stay alive solely on medical oxygen.

This machine takes AC220V or 110V power as power source,takes the air as the raw material.Adopting the original imported molecular sieve of high quality,under normal temperature through the PSA adsorption to get the high-purity quality oxygen.

Function Characteristics
1.Intelligent Control:Set the LED display, timing function is convenient to use with simple operation.
2.Over heating Protection,pure oil free compressor with thermal protector,
3.When compressor arrive high temperature the machine stop working automatically.
4.Better ensure the safety of the compressor and whole machine.

Normal working condition
1.Environment temperature :0°C -40°C
2.Relative humidity range: ∠80
3.Atmospheric pressure range: 86kpa-106kpa
4.When the temperature is below 0degreed,before using the equipment ,please place it in normal working environment temperature more than four hours and then turn on.

Care and Maintenance
1. Clean the outer appearance
Outer appearance should be cleaned at least one time every month,shut the power supply off first, use the clean and soft soaking disinfection cleaning cloth to clean,and prevent the liquid into the shell  aperture.

2. Clean the water tank
a) To clean the water tank,please add purified water into the water tank and change water every day.
b) The water tank should be cleaned every week,use the light detergent wash first and clean it with the run water to ensure the health of the body.
c) After cleaning the water tank,please check if the rubber stopper is fitted.

3. Clean the Oxygen Pipe and the Oxygen Inhaler
It`s suggested that it should be washed per three days,the head of the oxygen inhaler should
disinfect with5% potassium permanganate to soak for 5 minutes and then clean it.It`s suggested that the oxygen pipe should be changed every year.

4. For long term storage
For long term storage,please do as follow:
a) Pull the water tank out,pour the water out,and install it back.
b) Shut the power supply off,collect the electric line.
c) Have the oxygen pipe and the oxygen inhaler to be stored in the normal temperature,avoid shining and pollution.

5. Check after long term storage
a) Before use please make sure the electric line is good.
b) Clean the oxygen pipe and the oxygen inhaler.
c) Clean the water tank.

Note : This is a supplementary medical equipment and is not intended for serious disease or those who stay alive solely on medical oxygen.